About NBC
Products
NBC
R&D
For Investors
Quality Management
Site Map
Contact us
TopPage
Screen Printing Mesh
TYPE-V1
TYPE-V1 photo
NBC exclusive VALUE PHOTO EMULSION
TYPE V¹ diazo photopolymer emulsion designed for fine patterns. With resolution of 20µm and wide exposure latitude, it creates a high definition stencil.
TYPE V1 comprehensive evaluation chart
This chart illustrates TYPE-V¹ performance with a typical commercially available diazo emulsion shown at point 3. TYPE-V¹ has excellent performance in resolution, adhesion, solvent resistance and exposure latitude compared to a typical diazo emulsion. TYPE V1 comprehensive evaluation chart
Point I. Fine definition
This chart illustrates TYPE-V¹ performance with a typical commercially available diazo emulsion shown at point 3. TYPE-V¹ has excellent performance in resolution, adhesion, solvent resistance and exposure latitude compared to a typical diazo emulsion. Electron microscope photograph
Point II. Wide exposure latitude
TYPE-V¹ is exclusively designed for use with V-Screen in order to work with its specific UV characteristics to create wide exposure latitude and achieve resolution of thin lines and small features. The graph below describes the UV reflection of V-Screen.
* The correct exposure listed here is only for reference purposes as exposure conditions vary greatly from shop to shop.
UV Reflection of V-Screen
Reference exposure conditions
Light source High-pressure mercury lamp (3 kW),
Distance 1 m
Screen used Size:
Frame OD 2,500 mm _ 2,500 mm
Image area 50 mm _ 100 mm
Emulsion
thickness
15µm
Correct light exposure 115 - 150mJ/cm²
Point III. Excellent adhesion
Another characteristic of TYPE-V¹ is superior adhesion to V-Screen. The graphs shown below are comparative test results of adhesion to V-Screen of TYPE-V¹ typical commercially available diazo photopolymer emulsion. TYPE-V¹ shows far superior results.
Adhesion test graph Adhesion test graph
Test conditions
Screen
used
V330-23
Emulsion
thickness
15µm
Peeling
Tape
Scotch mending tape #810
Point IV. Solvent Resistance
TYPE-V¹ features greater resistance to solvents used in screen printing than the typical diazo photopolymer emulsions in general use today. For this experiment both screens were immersed in each solvent for 16 hours. Then each screen was checked for swelling.
Swelling when immersed in each solvent for 16 hrs
Swelling when immersed in each solvent for 16 hrs.

Back to Screen Printing Mesh
PageTop
All rights reserved. Copyright (c) 2003 NBC Meshtec Inc. NBC inc.